Items that have a flat shipping rate.
Showing 133–144 of 217 resultsSorted by latest
Spec sheet: IH1-UNV-232-T8
Operates: F25T8, F32T8, and F40T8 lamps Fulham IceHorse ballasts automatically adjust in cold temperatures to provide optimal light output. Ideal for use in normal light areas or low temperature environments such as the North or refrigeration units, this ballast is typically used in offices, board rooms, and retail.
Spec sheet:FHS1-UNV-3.6L
Input Voltage – 100-277VAC (UNV)
Input Frequency – 50/60Hz
Input Current – 0.07 A
Input Wattage – 4W
Compatible Batteries – NiCd, 3.6 VDC
Battery Capacities – 3AH, 4AH, 7AH
Total LED Power – 10W
Illumination Time – 90 – 360 Min.
Surge Protection – C62.41 (TVS)
Over Current Protection – Fuse
Recharge Time – 24 Hrs – 48 Hrs
LED Connection – Parallel
LED Output Protection – Self Resetting PTC
Output Classification – UL1310/Class 2
Medium Base Lamp
Spec sheet: ss-41015 spec
Nautical favorite Bulkhead lights can be installed on wall or ceiling. Use in stairwell for light along corridors. Place at steps or overhead to light up uneven surfaces. Cross-bar frame protects glass from breakage. Available in a variety of styles and finishes.
GU24 Base Lamp
Spec sheet: ss-pl-41015 spec
Nautical favorite Bulkhead lights can be installed on wall or ceiling. Use in stairwell for light along corridors. Place at steps or overhead to light up uneven surfaces. Cross-bar frame protects glass from breakage. Available in a variety of styles and finishes.
Spec sheet: KT-EMRG-1300-T5 spec
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one lamp in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp for minimum 90 minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
• AC output helps to guarantee compatibility with new lamp technologies.
• Features Time Delay Technology which helps to overcome end-of-life circuit protection
Spec sheet: KT-EMRG-800-T5 spec
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one or two lamps in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp for minimum 90 minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
• Features Time Delay Technology which helps to overcome end-of-life circuit protectio
Spec sheet: KT-EMRG-500-T5 spec
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one lamp in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp for minimum 90 minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
• Features Time Delay Technology which helps to overcome end-of-life circuit protection
Spec sheet: KTLD-60-UV-12V-MC1
|
This is the Keystone KTLD-60-UV-12V Constant Voltage LED Driver. The Maximum Output Current is 5000 mA. The Output Voltage is 12 Vdc with 60 watts of Maximum Output Power. This is a NON-dimmable driver. The input voltage is 120-277 Vac and has a Power Factor >0.9. The physical dimensions are 9.50″ long by 1.70″ wide by 1.18″ high. This Keystone LED driver offers a 5 Year Limited Warranty.
|
Spec sheet: KTLD-100-UV-24V-MC2
Keystone Constant voltage LED driver is a long lasting and low maintenance, LED-based light source used for all lighting applications. It operates at a voltage rating of 120 to 277-Volts AC and delivers 24-Volt DC output voltage. The driver provides short circuit and over current protection for LED lighting systems. It is perfect for dry and damp locations. LED driver meets UL 8750, FCC 47 CFR Part 15 Class B, RoHS and cURus standards.
Spec sheet: Sylvania-RT56-HO
SYLVANIA ULTRA RT5/6 HO is a universal input voltage 5″ and 6″ compatible LED recessed downlight kit that creates high performing white light and is optimized for new construction and retrofit applications utilizing pin based compact fluorescent lamps. Installation is done quickly and easily in most standard six-inch frames.
Spec sheet: TJTUNV010ACXXXB spec
Fulham DirectAC LED video:
Integrated AC Direct Drive (No DC Driver)
Universal Voltage (120~277) AC Engine
Suitable for open or fully enclosed luminaires
Suitable for luminaires with plastic and glass lenses
All 90CRI product meets CEC Title 24 requirement
cULus Classified 1598C
cULus Recognized 8750
Energy Star Luminaire 2.0 Listed (for rebate programs)
Energy Star Luminaire CSD
Spec sheet: KT-LED7T8-18GC-840-D spec
7 Watt 18″ T8 Linear Lamp – Direct Wire 120-277v – 4000K – 700 Lumens – 240′ Beam Angle – Replaces F15T12 or F15T8 Lamps
LED T8 18 Inch 4000K Direct Wire Tube 7W, DirectDrive 110-277V Glass tube, Cool White, with Integrated Ballast. Rewiring of existing fixture is necessary. Follow MFG Instructions. 1 live end feed. Must use non shunted sockets. 50,000 hour rated. -20 to 45 Degree Rated. ETL Approved. This lamp is a replacement for all 18″ fluorescent lamps.The ballast must be bypassed and power run to one end of 2 non-shunted sockets. Safe for food use, glass lamp has a shatterproof coating for safety. ETL Santiation Listed NSF/ANSI Standard 2 – Food Equipment
No products in the cart.