Showing 1–12 of 31 resultsSorted by latest
-
$125.85
BSL3102WM BODINE Emergency Driver
spec sheet:BSL310.spec
Emergency driver for LED strips
Class 2 output
10 Watts output power
Benefits:
•• Smart Charger Technology for low energy consumption
•• Listed for field or factory installation – UL 924 and CSA C22.2 No. 141
Emergency Lighting Compliant
•• Meets CEC Title 20 (California Energy Commission) efficiency standards
•• Class 2 output – UL 1310 Certified, CSA 22.2 No 223-M91 compliant
•• Emergency mode lumen output of up to 1300 lumens
•• Universal input (120-277 VAC)
•• Two wire input reduces wiring errors
•• Compatible with a variety of LED strip manufacturers
•• Compatible with AC drivers and LED loads rated for Class 2
•• RoHS compliant
-
$72.05
B90 Bodine Emergency Lighting Ballast 500-600 Lumens
Spec sheet: B90.spec.L8000039
Philips Bodine B90 emergency ballast works in conjunction with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The emergency ballast consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one compact galvanized case. When AC power fails, the B90 immediately switches to the emergency mode, operating one lamp at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast automatically returns to the charging mode and delays AC ballast operation for approximately three seconds to prevent false tripping of the AC ballast end-of-lamp life shutdown circuits.
- Can be used with most 32-40 watt 4′ T8, T12 or 4-pin long compact fluorescent lamps without an integral starter, Ubend, HO, VHO, circline and energy saving. Also compatible with most one, two, three or four lamp electronic, standard, energy saving and dimming AC ballasts.
- Optimized for one-lamp operation
- Produces 500-600 lumens of initial emergency light output, depending on the type of lamps
- Suitable for indoor and damp locations and for sealed and gasketed fixtures, including fixtures rated for wet locations
- Battery
- High temperature maintenance free
- Nickel-Cadmium
- 7-10 year life expectancy
- Battery charging current – 280 mA
- Recharge time – 24 hours
- Ambient temperature – 32ºF – 122ºF
- Test switch – Single pole
- AC input current – 280mA
- Illumination time – 90 minutes
- Single pole test switch
-
$155.05
Keystone KT-EMRG-LED-12-1200-AC /DF
12 Watt – 120-277 Volt – Dual Flex Conduit – Emergency Back-Up Driver for LED Can Downlights
Spec sheet: KT-EMRG-LED-12-1200-AC_DF
PRODUCT FEATURES
• Optimized for Keystone direct drive LED tubes.
Contact Keystone for details on functioning with other Type B LED tubes
• Illuminates entire LED load at reduced output under emergency mode
• One-piece design with metal housing
• 2-in-1 LED test switch and indicator light included
• Not for use with dimmers
• Evaluated to UL 924 requirements
• 90-minute operation in emergency mode
• UL listed
• Operating temperature: 0ºC/32ºF to 50ºC/122ºF
• Input frequency: 50/60 Hz
• Safety Standard: UL 924, Complies with CEC Title 20
Efficiency Standards
• Dual-flex conduit fits into 1/2” knockouts
-
$118.05
Keystone Lighting KT-EMRG-LED-5-500-AC/DF Constant Wattage LED Emergency Back-Up Driver
Spec sheet: KT-EMRG-LED-5-500-AC_DF
PRODUCT FEATURES
• Optimized for recessed LED downlight fixtures and retrofit kits, and Keystone DirectDrive compact lamps. Contact Keystone for details on functioning with other LED products
• Illuminates entire LED load at reduced output under emergency mode
• One-piece design with metal housing
• 2-in-1 LED test switch and indicator light included
• Dual-flex conduit fits into 1⁄ 2″ knockouts
• Not for use with dimmers
-
$95.85
Kestone Lighting KT-EMRG-LED 5-500-AC Constant Wattage LED Emergency Back-Up
Spec sheet: KT-EMRG-LED-5-500-AC
PRODUCT FEATURES
• Optimized for Keystone Single Ended Direct Drive LED tubes
Contact Keystone for details on functioning with other Type B LED tubes
• Illuminates entire LED load at reduced output under emergency mode
• One Piece Design with Metal Housing
• 2 -in- 1 LED test switch and indiciator light included
• Evaluated to UL 924 requirements
• Not for use with dimmers
-
$121.05
Bodine B54U Extended Run-Time; Emergency Lighting Equipment
Benefits:
• Extended 4-hour emergency illumination
• Universal input (120 through 277 VAC 50/60 Hz)
• End-of-Lamp-Life Compatible
-
$44.65
Bodine B100 Emergency Lighting Equipment
Spec sheet: B100.spec.bodine
Benefits:
• Dry or Damp Locations
• Emergency mode lumen output up to 450 lumens
• End-of-Lamp-Life Compatible
-
$74.35
Bodine B94CGU Universal input voltage; One-lamp emergency illumination for
4-pin fluorescent lamps (without integral starter); Suitable for low mercury lamps
Spec sheet: B94GU.B94CGU.spec.
LAMP (4-PIN) LUMENS
1 Lamp
PL-T 42 W/4P, Dulux T/E 42W 750
PL-T 32 W/4P, Dulux T/E 32 W 700
PL-T 26 W/4P, Dulux T/E 26 W, F26TBX/4P 525
PL-T 18 W/4P, Dulux T/E 18 W, F18TBX/4P 450
PL-C 26 W/4P, Dulux D/E 26 W, F26DBX/4P 525
PL-C 18 W/4P, Dulux D/E 18 W, F18DBX/4P 400
PL-C 13 W/4P, Dulux D/E 13 W, F13DBX/4P 325
PL-L 40 W, Dulux L 40 W, F40/30BX/4P 650
PL-L 36 W, Dulux L 39 W, F39/3BX/4P 600
PL-L 24 W, Dulux L 27 W, F27/24BX/4P 425
PL-C 18 W, Dulux L 18 W, F18 BX 300
F382D/4P 625
-
$114.05
Bodine BDL60U One- or two-lamp emergency;
Universal input voltage: 120 through 277 VAC, 50 or 60 Hz;
Spec sheet: BDL60U.spec.
LAMP LUMENS
1 Lamp 2 Lamps
FO32, FBO31 T8 – 575, 625
FO25, FB024 T8 – 450, 575
FO17, FB016 T8 – 375, 550
FO96 T8 700
F40T12, F40/U – 350, 375
F40T12/ES (34 W) – 350, 375
F96T12 HO, VHO 575
F382D/4P 625
F282D/4P 450
F212D/4P – 375, 500
F162D/4P – 300, 375
-
$145.05
Bodine BSL17C-C2 T1U Model Emergency LED Driver
Listed for field installation – class 2 output – 7.5 Watts output power
Spec sheet: BSL17C-C2_17-C2.spec
Benefits:
• Listed for field or factory installation – UL 924 and CSA C22.2 No. 141
Emergency Lighting Compliant
• Smart Charger Technology for low energy consumption
• Meets CEC Title 20 (California Energy Commission) efficiency standards
• Class 2 output – UL 1310 Certified, CSA 22.2 No 223-M91 compliant
• Controlled power for predictable discharge
• Emergency mode initial lumen output of up to 975 lumens
• 15-50 VDC for wide range of LED loads
• Universal input (120 through 277 VAC, 50/60 Hz)
• RoHS Compliant
-
$95.65
KT-EMRG-LED-12C-1200-K1 LED EMERGENCY BACK-UP DRIVER KIT CEC Compliant
Spec sheet: KT-EMRG-LED-12C-1200-K1
Keystone also offers CEC Compliant LED battery backup options. These LED emergency battery packs feature rechargeable LiFePO4 battery technology and complies with CEC Title 20 requirements. CEC Compliant Smart Safe is available in 1-piece enclosed, 2-piece driver & battery, and kit options.
-
$95.65
KT-EMRG-LED-12-1200-K1
Keystone LED Emergency Backup Kit – 120-277V – 1,200 Lumens
Spec sheet: KT-EMRG-LED-12-1200-K1
Istallatin sheet: SmartSafe_Kit_Instructions
KT-EMRG-LED-12-1200-K1,Field Installable LED Emergency Lighting,System by Keystone – Emergency LED Systems. The Emergency LED kits give safe and efficient lighting during an emergency. The Emergency LED retrofit kit includes: one linear-shaped LED module, emergency LED driver, Field Installable LED Emergency Lighting System by Keystone – Emergency LED Systems. The Emergency LED kits give safe and efficient lighting during an emergency. The Emergency LED retrofit kit includes: one linear-shaped LED module, emergency LED driver,
