Showing 145–156 of 217 resultsSorted by latest
-
$68.05
Advance IMH39GBLSM – 39 Watt – Electronic Metal Halide Ballast Bottom Leads
Spec sheet: IMH39GBLS spec
Low frequency electronic HID ballasts such as the Philips Advance e-Vision line
constantly measure and adjust the wattage, optimizing delivery of the ceramic
lamps’ superior color properties. This makes ceramic metal halide operated by eVision ballasts the premier choice for many applications previously illuminated by
either tungsten halogen or incandescent sources, such as retail lighting.
-
$18.05
Advance Centium ICN4P32N
Spec sheet: ICN4P32N spec
Philips Advance low-profile Centium T8 ballasts for standard and energy saving lamps are an optimal choice for a broad range of new construction and retrofit applications within the commercial sector including general office lighting and board room applications. The Advance ICN-4P32-N electronic fluorescent ballast operates (4) F32T8 lamps at 120/277 input volts.
-
$14.25
Advance Centium ICN3P32N
Spec sheet: ICN3P32N spec
Philips Advance low-profile Centium T8 ballasts for standard and energy saving lamps are an optimal choice for a broad range of new construction and retrofit applications within the commercial sector including general office lighting and board room applications. The Advance ICN-3P32-N electronic fluorescent ballast operates (3) F32T8 lamps at 120/277 input volts.
-
$14.25
Advance Centium ICN2P32N
Spec sheet: ICN2P32N spec
Philips Advance low-profile Centium T8 ballasts for standard and energy saving lamps are an optimal choice for a broad range of new construction and retrofit applications within the commercial sector including general office lighting and board room applications. The Advance ICN-2P32-N electronic fluorescent ballast operates (2) F32T8 lamps at 120/277 input volts.
-
$106.55
Keystone KT-EMRG-LED-12-1200-EN LED Emergency Back-up
Spec sheet: KT-EMRG-LED-12-1200-EN
LED Emergency Back-Up Driver | Dual Flex Conduit | 12W Output | 120 –277V Input
DRIVER TYPE: Constant Wattage LED Emergency
MAX. OUTPUT POWER: 12W
INPUT VOLTAGE: 120 –277Vac ±10%
OUTPUT VOLTAGE: 20~54Vdc
OUTPUT CURRENT: 550 –225mA
WARRANTY: 5 Years
-
$60.85
Keystone KT-EMRG-LED-5-500-EN LED Emergency Back-up
Spec sheet: KT-EMRG-LED-5-500-EN
LED Emergency Back-Up Driver | Dual Flex Conduit | 5W Output | 120 –277V Input
DRIVER TYPE: Constant Wattage LED Emergency
MAX. OUTPUT POWER: 5W
INPUT VOLTAGE: 120 –277Vac ±10%
OUTPUT VOLTAGE: 20~54Vdc
OUTPUT CURRENT: 250 –100mA
WARRANTY: 5 Years
-
$121.65
Keystone KT-EMRG-750-CFL4 750 lumen 90 minute 120/277V
Spec sheet: KT-EMRG-750-CFL4 spec
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one lamp in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp(s) for minimum 90 minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
-
$112.05
Keystone KT-EMRG-1400-SL/B 1400 lumens 90 minutes 120/277V
Spec sheet: KT-EMRG-1400-SL spec
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one or two lamps in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp(s) for minimum 90 minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
• Features Time Delay Technology which helps to overcome end-of-life circuit protection
-
$68.85
Keystone KT-EMRG-1400/B 1400 lumen 90 minutes 120/277V
Spec sheet: KT-EMRG-1400 spec
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one or two lamps in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp(s) for minimum 90 minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
• Features Time Delay Technology which helps to overcome end-of-life circuit protection.
-
$118.85
KT-EMRG-700-SL KEYSTONE 700 LUMEN 90 MINUTES LOW PROFILE CASE
Spec sheet: KT-EMRG-700-SL spec
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one lamp in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp for minimum 90 minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
• AC output helps to guarantee compatibility with new lamp technologies.
• Features Time Delay Technology which helps to overcome end-of-life circuit protection
-
$69.25
Keystone KT-EMRG-700/B 90 minute 700 lumen Emergency Ballast
Spec sheet: KT-EMRG-700 spec
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one lamp in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp(s) for minimum 90 minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
• Features Time Delay Technology which helps to overcome end-of-life circuit protection
-
$61.35
Keystone 500 Lumen 1 Lamp Fluorescent Emergency Ballast 120/277V – Low Profile
Spec sheet: KT-EMRG-500-SL spec
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one lamp in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp for minimum 90 minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
• Usable in sealed and gasketed fixtures.
• Features Time Delay Technology which helps to overcome end-of-life circuit protection.
