• Advance IZT-2PSP32-SC Mark 7 0-10V Dimming Ballast

    Advance IZT-2PSP32-SC Mark 7 0-10V Dimming Ballast

    $71.65

    IZT-2PSP32-SC Advance Mark 7 Electronic Dimming Ballast

    Spec sheet: 913701260901spec

    This Advance Mark 7 0-10V IZT2PSP32SC35I dimming fluorescent ballast operates two F32T8 lamps at 120 to 277 Volts.

    • Typically used in offices, board rooms, and retail spaces
    • Dims lamps directly from compatible 0-10V controls
    • Extends lamp life in frequent starting applications
    • Also operates F17T8 and F25T8 lamps
    Add to cartDone
  • Advance REZ-2S32-SC Mark 10 Dimming Ballast

    Advance REZ-2S32-SC Mark 10 Dimming Ballast

    $84.85

    Advance REZ-2S32-SC Mark 10 Program Start Dimming Ballast

    Spec sheet: REZ2S32SC spec

    Mark 10 Powerline electronic controllable ballasts for linear T8 lamps combine the long life and energy efficiency of fluorescent technology with the controllability and full-rangedimming of incandescent systems. And they’re easy to install because they require no additional wiring.

    • Programmed Start
    • Ballast operates from 60 Hz input source of 120V as applicable with sustained variations of +/- 10%
    • Direct operation from a 0-10V control signal
    • Class A Sound Rating
    • control lamp light output from 100% – 5% relative light output for T8 and CFL lamps and 100% – 1% relative light output for T5/HO lamps
    Add to cartDone
  • Advance IZT-3PSP32-SC Mark 7 0-10V Dimming Ballast

    Advance IZT-3PSP32-SC Mark 7 0-10V Dimming Ballast

    $71.65

    IZT-3PSP32-SC Advance Mark 7 Electronic Dimming Ballast

    Spec sheet: 913701261702 spec

    This Advance Mark 7 0-10V IZT3PSP32SC35I dimming fluorescent ballast operates three F32T8 lamps at 120 to 277 Volts.

    • Typically used in offices, board rooms, and retail spaces
    • Dims lamps directly from compatible 0-10V controls
    • Extends lamp life in frequent starting applications
    • Also operates F17T8 and F25T8 lamps
    Add to cartDone
  • Advance IZT2S54D Dimming Ballast

    Advance IZT2S54D Dimming Ballast

    $73.05

    Advance Mark 7 0-10V IZT2S54D

    Spec sheet: IZT-2S54-D Spec

    (2) Lamp – F54T5/HO – 120/277 Volt – Programmed Start – 1.0 Ballast Factor – Dimming

    The Mark 7 0–10V series of dimmable electronic ballasts offer maximum versatility
    by incorporating separate control leads for use with a wide array of controllers,
    including occupancy sensors, daylight harvesting controls, and building
    management systems from more than 40 manufacturers. When paired with linear
    fluorescent and 4-pin compact fluorescent lamps, these ballasts optimize the
    benefits of such popular sustainable lighting techniques as daylight harvesting,
    occupancy sensing, and load shedding to satisfy the need for an affordable, flexible
    and versatile controllable lighting solution.

    Add to cartDone
  • Advance Mark 7 IZT128D Dimming Ballast

    Advance Mark 7 IZT128D Dimming Ballast

    $73.65

    Advance Mark 7 IZT128D T5 Dimming Ballast

    Spec Sheet: IZT-128-D Spec

    Philips Advance electronic dimming IZT128D35M fluorescent ballast features a 120-277 voltage input. For use with (1) F28T5 120-277V lamps.

    Add to cartDone
  • Advance IZT2S28D Dimming Ballast T5

    Advance IZT2S28D Dimming Ballast T5

    $75.95

    Philips Advance IZT2S28D Dimming Ballast for T5 lamps.  Operates 2 lamps (F14T5, F21T5, F28T5)

    Spec sheet: IZT2s28D spec

    Philips Advance Mark 7 0-10V dimming ballast provides maximum versatility with low voltage dimming. The Advance IZT2S28D dimming fluorescent ballast operates two F14T5 lamps at 120/277 input volts. This ballast also works with two F21T5, F28T5 or F28T5/ES at 25 watts, making it ideal for use in normal lighting areas such as offices, boardrooms, and retail.

    Add to cartDone
  • Advance IEZ2S24D Dimming Ballast

    Advance IEZ2S24D Dimming Ballast

    $87.05

    Philips Advance Mark 10 Powerline IEZ2S24D35M Dimming Ballast

    Spec sheet: IEZ2S24

    Operates (2) F24T5/HO Lamps 120-277 volt

    Mark 10 Powerline ballasts
    provide an easy solution without the need for additional control leads. Simply, (1)
    replace the ballast, (2) replace the switch, (3) dim the lights, that is all it takes. It’s
    that easy to bring the convenience and flexibility of fluorescent dimming to
    conference rooms, private offices, auditoriums, architectural cove lighting –
    anywhere dimming is required.

    Add to cartDone