Showing 229–239 of 239 resultsSorted by latest
Spec sheet: WH2-277-L
Spec sheet: WH22-120-C
spec sheet: ADVANCE ICF-2S26-H1
Program start
120/208/240/277 volt
1-2 lamps
CFQ26W/G24Q, CFM32W/GX24Q, CFS16W/GR10, FT24W/2G11
Offering maximum versatility, the Philips Advance family of SmartMate ballasts for
4-pin compact fluorescent lamps drive a broad range of quad and triple-tube,
circline, 2D, and long twin-tube lamps. SmartMate ballasts’ energy efficient design,
compact and lightweight housing, and user-friendly features make these ballasts an
ideal choice for fixture manufacturers, retrofitters, and MRO replacement
Spec Sheet: ADVANCE ICF-2S18-H1
Program start
120/208/240/277 volt
1-2 lamps
CFQ18W/G24Q, CFS16W/GR10Q, CFS21W/GR10
Offering maximum versatility, the Philips Advance family of SmartMate ballasts for
4-pin compact fluorescent lamps drive a broad range of quad and triple-tube,
circline, 2D, and long twin-tube lamps. SmartMate ballasts’ energy efficient design,
compact and lightweight housing, and user-friendly features make these ballasts an
ideal choice for fixture manufacturers, retrofitters, and MRO replacement.
Spec sheet: ADVANCE ICF-2S13 SPEC
Program start
120/208/240/277 volt
1-2 lamps
CFQ13W/G24Q, CFS10W/GR10Q, CFS16W/GR10
Offering maximum versatility, the Philips Advance family of SmartMate ballasts for 4-pin compact fluorescent lamps drive a broad range of fluorescent lamps. The Advance ICF-2S13-H1-LDK electronic fluorescent ballast operates (2) 10 Watt CFL lamps at 120/277 input volts. Ideal for use in normal light areas, this programmed start ballast is typically used in offices, board rooms, and retail. Also operates (1 or 2) 10 Watt CFS10W/GR10Q, (1 or 2) 16 Watt CFS16W/GR10q, or (1 or 2) 13 Watt CFTR13W/GX24Q Plug-in CFLs.
Spec Sheet:XI025C100V036DMN
Factory set at 700mA output, adjust down to 100mA via SimpleSet technology or reistor. These drivers offer the needed flexibility and performance for the application with precise tuning of drive currents, selectable dimming curves and adjustable minimum dimming levels.
* 120-277V 50/60Hz
* Output Power 25W
* Dimmable
Spec sheet: LED120A0024V075 spec
Spec sheet: LED120A0024V075 spec2
* input voltage 108-132V
* frequency 60Hz
* power consumption range 3.0-21.5W
Spec Sheet: FH11-UNV-750L-CEC
FH11-UNV-750L-CEC runs the following lamp combinations:
1X, F54T5HO, F72T8HO, FT50W, FT40W, F84T12HO, F39T5HO, F28T5, F60T12SL, F60T12HO, CFTR42W, 40WCRT9, 2D38W, CFTR32W, F70T8, FT55W, F40T8, F60T8HO, F40T12, F96T12SL, FT36/39W, F58T8, CFQ26W, 22WCRT5, 55WCRT5, F48T12HO, F32T8(30W), F32T8, F32T8(28W), F21T5, F24T5HO, 32WCRT9, 2D28W, F14T5, FT24/27W, F32T8(25W), F25T8 2X, FT24/27W, F40T12, F25T8, CFTR18W, 2D28W, FT18W, F30T12, F17T8, F20T12, Lamps Suitable for use in 15°C TO 55°C (59°F TO 132°F) ambient temperatures: 1X, F96T12HO, F96T12HO, F54T5HO, F35T5; 2X -CFQ13W, CFTR26W, CFTR13W, 2D38W
Spec sheet: Download Spec PDF: IZT-MH-210315-R-LF spec
* For 210W or 315W MH Lamps
* ANSI C183 or C182
* 200-277V 50/60Hz Electronic
Soec sheet: CDM315T12940UO
The Philips 315W ceramic metal halide 4200K lamp spectrum is designed for use in propagation and vegetation.
* 1.95PPF (photosynthetic photon flux)
* 4200K
* 33,000 initial lumens
* 90% lumen maintenance 8,000hr
* rated for open fixtures
Ships same day
Spec sheet: philips 315
Superior performance
• Excellent PPF (Photosynthetic Photon Flux) – 1.9 umols/s
• Superior lumen/PPF maintenance of 90% at 8,000 hours
• Long life – 20,000-hour rated average life†
• Suitable for use in open fixtures
Reduced cost of ownership
• Higher growth light compared to 400W HPS lamps*
• 93% ballast efficiency can provide substantial energy savings
• Increased time between re-lamping cycles when compared
to standard metal halide lamps**
Ships same day
No products in the cart.