“Commercial LED CLC1-14W-RE-E26 HID Retrofit” has been added to your cart.
View cart
Showing 121–132 of 215 resultsSorted by latest
-
$12.05
LED Electronic ballast compatible 4pin CFL 9W-1000lm Horizontal G24q Base 80CRI 40K 120-277V
Spec sheet: LED CFL Eiko
Ballast Compatibility List: CFL Ballast List
DESCRIPTION
LED PL Replacement Lamps directly replace fluorescent PL lamps at a
fraction of the energy cost.
FEATURES
• Plug-and-play installation for 4-pin G24Q and GX24Q bases
• Lasts 5x longer than compact fluorescent lamps
• Consumes up to 1/3 the energy of conventional CFL
• Base rotates for precision orientation once installed in fixture
• Shatter-resistant for reduced risk of injury and breakage
• Instant-on with no warmup, unlike CFLs
• 9W G24Q replaces 18-42W CFL
• Suitable for use in 6” cans
• Non-dimmable
• Not compatible with all ballasts. See eiko.com for list of
tested ballasts
-
$24.05
T1M1UNV0350-15L Fulham ThoroLED Driver Constant-Current Dimming 15W 700mA
Spec sheet: T1M1UNV0350-15L
ThoroLED – Single Channel – 0-10V Dimming LED Driver – Universal Voltage Input – 350mA Constant Current Output – 15W Max – 21-42 VDC – Long Case w/ Side Leads – IP64
- IP65 for robust ingress protection
- 0-10V and wireless dimming options
- Wide programmable current range in 1mA increments
- Advanced programmability of output current and dimming curve (for custom dimming profiles, step dimming and dim-to-off)*
- MCU controlled circuit and health monitoring
-
$24.05
T1M1UNV0350-15F Fulham ThoroLED Driver Constant-Current Dimming 15W 350mA
Spec sheet: T1M1UNV0350-15F
ThoroLED – Single Channel – 0-10V Dimming LED Driver – Universal Voltage Input – 350mA Constant Current Output – 15W Max – 21-42 VDC – Compact Case w/ Terminals – IP60
- IP65 for robust ingress protection
- 0-10V and wireless dimming options
- Wide programmable current range in 1mA increments
- Advanced programmability of output current and dimming curve (for custom dimming profiles, step dimming and dim-to-off)*
- MCU controlled circuit and health monitoring
-
$22.15
Fulham Workhorse 33 WH33-120-L
120 Volt – Electronic Ballast – Instant Start – 0.87 Ballast Factor
Spec sheet: WH33-120-L
Work Horse Fluorescent Electronic Ballasts offer solid-state electronic circuitry with a high power factor. Work Horse instant start ballasts have a small case size and are lightweight, versatile and energy saving. These ballasts meet ANSI C82.11-1993 code requirements and are UL & cUL listed Type 1 or Type 2 outdoor. Work Horse has a minimum operating temperature of -20° F (-30° C) and a maximum case temperature 158° (70° C). The Work Horse family of ballasts provides outstanding lamp flexibility and versatility and is ideal for electrical contractors who want to improve the likelihood of having the right ballast on their service truck when they need it.
-
$95.65
KT-EMRG-LED-12-1200-K1
Keystone LED Emergency Backup Kit – 120-277V – 1,200 Lumens
Spec sheet: KT-EMRG-LED-12-1200-K1
Istallatin sheet: SmartSafe_Kit_Instructions
KT-EMRG-LED-12-1200-K1,Field Installable LED Emergency Lighting,System by Keystone – Emergency LED Systems. The Emergency LED kits give safe and efficient lighting during an emergency. The Emergency LED retrofit kit includes: one linear-shaped LED module, emergency LED driver, Field Installable LED Emergency Lighting System by Keystone – Emergency LED Systems. The Emergency LED kits give safe and efficient lighting during an emergency. The Emergency LED retrofit kit includes: one linear-shaped LED module, emergency LED driver,
-
$90.05
KEYSTONE #KT-EMRG-LED-5C-500-K1
LED Emergency Back-Up Kit; 12-41VDC; Metal; 5W LED Lamp; 120-277V 50/60Hz Input; Nickel Cadmium
Spec sheet: KT-EMRG-LED-5-500-K1
Installation sheet: SmartSafe_Kit_Instructions
Field Installable LED Emergency Lighting System by Keystone – Emergency LED Systems. The Emergency LED kits give safe and efficient lighting during an emergency. The Emergency LED retrofit kit includes: one linear-shaped LED module, emergency LED driver, NiCad battery pack, required mounting hardware, and a UL Classified label to attach to the fixture after installation. This emergency lighting kit can be used with T8 LED troffers that have been retrofitted. They can also be used in fluorescent fixtures in lieu of a fluorescent emergency ballast.
-
$29.85
Satco S29320 10.5W/LED/5.5″FLUSH/30K/RD/WH 10.5 watt; 5.5″ Flush Mount LED Fixture; 3000K; Round Shape; White Finish; 120 volts
We ship replacement Satco 62-1700
Spec sheet: S29323
This 5.5 Inch 11 Watt Satco LED surface mount ceiling light features a retrofit style in a white finish that fits most standard 4″ j-boxes. This edge lit fixture replaces a 50 watt incandescent light and provides 580 lumens with warm white color temperature at 3000K. This surface mount round downlight uses the latest in edge-lighting technology to produce a low glare smooth lighting effect. It’s ideal for applications in kitchens, offices, bedrooms, and dens as well as in wet locations, such as showers, bathrooms, or outdoors. LED fixtures are more energy efficient and last much longer than traditional incandescent versions.
- 5.5″ Flush Mount Fixture
- Offers 580 lumens and uses 10.5 energy watts with warm white color temperature (3000K)
- Suitable for installation in wet and damp locations
- Operates at 120 volts
- Provides color rendering at a CRI of 90
- Energy saving technology to last approximately 50,000 hours
- Includes a 5 year manufacturer warranty
-
$29.85
Satco S29320 10.5W/LED/5.5″FLUSH/27K/RD/WH 10.5 watt; 5.5″ Flush Mount LED Fixture; 2700K; Round Shape; White Finish; 120 volts
We ship replacement Satco 62-1700
Spec sheet: S29320
This 5.5 Inch 11 Watt Satco LED surface mount ceiling light features a retrofit style in a white finish that fits most standard 4″ j-boxes. This edge lit fixture replaces a 50 watt incandescent light and provides 580 lumens with warm white color temperature at 2700K. This surface mount round downlight uses the latest in edge-lighting technology to produce a low glare smooth lighting effect. It’s ideal for applications in kitchens, offices, bedrooms, and dens as well as in wet locations, such as showers, bathrooms, or outdoors. LED fixtures are more energy efficient and last much longer than traditional incandescent versions.
- 5.5″ Flush Mount Fixture
- Offers 580 lumens and uses 10.5 energy watts with warm white color temperature (2700K)
- Suitable for installation in wet and damp locations
- Operates at 120 volts
- Provides color rendering at a CRI of 90
- Energy saving technology to last approximately 50,000 hours
- Includes a 5 year manufacturer warranty
-
$50.65
XI150C105V140CNF1
Philips Advance Xitanium LED Driver 150W 120-277V 1.05A 0-10V Dimming
Spec sheet: XI150C105V140CNF1M
Xitanium Outdoor LED Drivers are available in wattages from 40W to 150W for hardwire integration into outdoor luminaires for the most rugged applications. These drivers operate to specification under wide temperature and electrical ranges to ensure reliability. 1-10V dimming enables luminaires to be easily connected to a wide variety of sensors and control systems to facilitate dimming, thus maximizing energy savings.
-
$28.05
T1M1UNV0700-30L
Fulham 30 Watt ThoroLED 0-10V Dimmable Constant Current LED Long Case Driver with Side Leads – 120-277V
Spec sheet: T1M1UNV0700-30L
- 0-10V dimming
- Constant current
- Long case + side leads
- Output current: 700mA
- Output wattage: 30 watt
- Input universal voltage 120-277V
- Output voltage 21-42 VDC
- Input current .3A max
- 1 output channel
- cURus / Class 2 / CE / RoHS / IP64 / Dry or Damp Locations / Type TL/HL
- 5 year warranty
-
$74.65
IH1-UNV-232-T8 Fulham IceHorse 1 Refrigeration Cooler Ballast
Spec sheet: IH1-UNV-232-T8
Operates: F25T8, F32T8, and F40T8 lamps Fulham IceHorse ballasts automatically adjust in cold temperatures to provide optimal light output. Ideal for use in normal light areas or low temperature environments such as the North or refrigeration units, this ballast is typically used in offices, board rooms, and retail.
-
$46.25
Fulham FHS1-UNV-3.6L
Emergency LED Driver – 3.6 Volt – 4-10 Watts
Input 100-277V – For Constant Current Products Only
Spec sheet:FHS1-UNV-3.6L
Input Voltage – 100-277VAC (UNV)
Input Frequency – 50/60Hz
Input Current – 0.07 A
Input Wattage – 4W
Compatible Batteries – NiCd, 3.6 VDC
Battery Capacities – 3AH, 4AH, 7AH
Total LED Power – 10W
Illumination Time – 90 – 360 Min.
Surge Protection – C62.41 (TVS)
Over Current Protection – Fuse
Recharge Time – 24 Hrs – 48 Hrs
LED Connection – Parallel
LED Output Protection – Self Resetting PTC
Output Classification – UL1310/Class 2
Commercial LED CLC1-14W-RE-E26 HID Retrofit